TGH Aviation News | TGH Aviation

Capabilities on Beechcraft Aircraft

TGH Aviation offers aircraft component repair on the following Beechcraft Models. Below is a list of the most commonly requested repairs and does not eliminate capabilities on other instruments used in this make of aircraft. If you need an instrument repaired that is not listed below, please call our Sales Department at 1 (800) 843-4976.

AIRCRAFT	P/N	MFG	NOMENCLATURE
BEECHCRAFT KING AIR 200	4000B-10	EDO	DG
BEECHCRAFT KING AIR 350	1U367-207-8	SIGMA TEK	GYROSCOPE
BEECHCRAFT KING AIR 350	1U367-232-2	SIGMA TEK	GYROSCOPE
BEECHCRAFT KING AIR 90	200-5	AIM	DIRECTIONAL GYRO
BEECHCRAFT KING AIR 90	90-380009-7	GULL	FUEL FLOW TRANSMITTER
BEECHCRAFT KING AIR 90	5000B-10	EDO	GYROSCOPE

Capabilities on Bell Helicopters

TGH Aviation offers aircraft component repair on the following Bell Helicopter Models. Below is a list of the most commonly requested and does not eliminate capabilities on other instruments used in this make of aircraft. If you have an instrument not listed below, please call our Sales Department at 1 (800) 843-4976.

Cores For Cash

It takes a lot of dedication from our team to ensure that we always have the part you need. TGH Aviation is always looking for Cores to add to our Overhaul Exchange Inventory. We offer Cash for a variety of repairable cores. Check out our online list of the Most Frequently Purchased Cores here to see if you have a core we would be interested in, or call our Sales Department at 1 (800) 843-4976.

You can also submit a list of possible cores for cash by emailing us today. We will review your submissions and let you know which cores we would be interested in adding to our inventory.

We look forward to working with you to get these much needed instruments, overhauled, repaired and on the shelf, ready-to-ship for our customers. We look forward to hearing from you soon!

General Overview Fuel Measuring Systems

General Overview Fuel Flow Systems

The purpose of the Fuel Quantity Measuring System is to provide the pilot with a visual representation of the amount of useable fuel which is currently being held within the aircrafts fuel tanks.

There are two basic methods of providing this measurement:

Resistive Type Measuring Systems

Capacitive Type Measuring Systems

Both of these systems provide fuel quantity information by varying a precisely controlled electrical signal. However the method of varying that signal is considerably different between the two. In general, while resistive type systems are reasonably accurate and reliable they do not provide the high level precision and extended long term reliability that is provided by the capacitive type system. As a result, in modern aircraft, resistive systems are typically relegated to lower cost, lower performance aircraft while higher cost, and higher performance aircraft will almost always utilize the capacitive systems.

This training document will provide a general knowledge about both of these systems without going too deeply into the engineering and technical aspects of either system. This document is not intended to provide technical training at a level that would permit the student to perform repairs or maintenance on this system but rather is intended to provide a general knowledge of those systems at a level required by a Sales or Marketing person. Therefore only following subjects will be addressed:

a) A General Theory of System Operation
b)Components of the system
c) System pros and cons
d) Typical failure modes
e) Typical end users
f) Common manufacturers

Stay tuned for upcoming Blogs